RMTM Series

Features

• 36” high by 10 feet long with 10 gauge heavy duty curled skinplate.
• Trip moldboard design using four 5/8” diameter wire by 3-1/2” O.D. by 22-1/2” long heavy duty adjustable tension springs.
• 15 degree blade attack angle with heavy duty base angle.
• Moldboard is capable of reversing 35 degrees either side of bulldoze position through two 3-1/2” diameter by 12” stroke hydraulic reversing cylinders or manually reversed with lock out pins at preset degrees.
• Six 3/8” thick moldboard reinforcement ribs standard.
• Heavy duty pushframe 4” x 4” x 3/8” HSS pushbar spanning the three attachment points of the moldboard.
• Heavy duty angle oscillator bar with flame cut ears on 31” centers to allow the moldboard to follow the road contours.
• Moldboard trip action controlled by a center mount, rubber cushioned, thrust rod which reduces stress during tripping.
• Moldboard backer angle punched to accept 12” centers cutting edges
• Two point level lift chain arrangement standard.

Options:

• Mushroom casters or 10” steel wheel caster assemblies.

Find an Everest dealer near you!